Payment & Shipping Terms:
|Name:||Hot Rolled Stainless Steel Sheet||Color:||Customers Requirement|
|Width:||4 - 2000mm||Model Number:||300 Series|
50mm Hot Rolled Steel Sheets,
3mm Hot Rolled Steel Sheets,
austenitic hot rolled steel sheets
304 Hot Rolled Stainless Steel Sheet Plate Thickness 3mm - 50mm
300 Series stainless steels are classified as austenitic, and are hardenable only by cold working methods. These grades of stainless have chromium (approx. 18 to 30%) and nickel (approx. 6 to 20%) as their major alloying additions. Type 304 is the most widely used alloy of all stainless steels. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain.
304 Chemical Properties:
C: ≤0.08 ,Si :≤1.0 ,Mn :≤2.0 ,Cr :18.0～20.0 ,
Ni : 8.0～10.0,S :≤0.03 ,P :≤0.045
|Tensile strength σb (MPa||
|Specific heat capacity(0 ~ 100 ℃, KJ kgK)||
|Conditions yield strength||
σ0.2 (MPa) ≥ 205
|Thermal conductivity (W m. K)||
(100 ℃), 16.3 21.5 (500 ℃)
|Elongation δ5 (%)||
|The linear expansion coefficient k.||
(0 ~ 100 ℃), 17.2 (0 ~ 500 ℃) of 18.4
|Section shrinkage ψ (%)||
|Resistivity (20 ℃, 10 Ω m.)||
≤ 187HB; ≤ 90HRB; ≤ 200HV
|The longitudinal elastic modulus (20 ℃, KN/mm)||193|
|Melting point (℃)||
1398 ~ 1454
|Specific heat capacity||0.50|
Stainless steel Bright and annealing (BA)
And the copper alloy is easily oxidized during the heat treatment. In order to prevent oxidation and improve the surface quality of the workpiece, it must be annealed in a protective atmosphere or vacuum, so-called bright annealing. The protective atmospheres commonly used in the heat treatment of copper and copper alloys are water vapor, ammonia decomposition, incomplete combustion and dehydration of ammonia, nitrogen, dry hydrogen and partially combusted gas (or other combustible gases). Can be selected according to the type,composition and requirements of the alloy.
Food preparation equipment, especially in chloride environments
Chemical processing, equipment
Laboratory benches and equipment
Rubber, plastics, pulp & paper machinery
Pollution control equipment
Boat fittings, value and pump trim
Pharmaceutical and textile industries
Condensers, evaporators and tanks
1. Q: do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but freight and necessary taxes will be paid by you.
2. Q: how is your quality? How do you guarantee the quality?
A: our company has passed many certifications, each product has to go through 4-5 processes of inspection, with the corresponding quality test report and certificate. Welcome customers to our factory for inspection.
3. Q: How long is your delivery time?
A: For Stocks, we can send the goods to loading port within 7 days after receiving the deposit ;For production period,it usually needs about 15 days ~30 days after receiving the deposit.
4. Q: Where's your factory?
A: Our factory is in Wuxi city (near Shanghai) afforded enough production ability and earlier delivery time.
5. Q: What is your terms of payment?
A: 100% T/T advance.
30% T/T and balance against copy of documents.
30% T/T advance, balance L/C at sight.
6. Q:Can we visit your factory?
A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Contact Person: exports