Payment & Shipping Terms:
|Finish:||Mill Finish||Material:||Cold Rolled Stainless Steel Sheet 446|
|Thickness:||0.3-6mm||Size:||1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm,|
|Sample:||Free Sample||Color:||Brass Or Customer Requirements|
|Process:||Color Plating Process||Pattern:||According To The Customer Request|
cold rolled steel plate,
cold rolled stainless steel
PVD Coating / Coloured Cold Rolled Stainless Steel Sheet 201 For Decoration
PVD coating is one of the best methods for enhancing thin film plating elements. The vacuum deposition method coats the product with a film of hard refractory material 1-2 microns thick.
PVD coatings surpass traditional electroplated coatings, it has superior hardness and wears resistance. Here are the advantages of PVD coating:
· PVD coating is harder and more corrosion resistant than coating applied by electroplating process.
· PVD coatings do not discolor or tarnish, and have reasonably high corrosion resistance and do not suffer under UV radiation so easy.
· More environmentally friendly than traditional coating processes such as electroplating or painting.
· PVD coatings have excellent wear and abrasion resistance and it’s durable.
FINISH AND SPECIFICATION
|No.1||A rough, dull surface, which results from hot rolling to the specified thickness, followed by annealing and descaling.|
|2D||A dull finish which results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. A 2D finish is used where appearance is not a concern.|
|A bright, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used as is, or a preliminary step to polishing.|
|The bright annealed mill surface is obtained by annealing the material under an atmosphere, so that scale is not produced on the surface.|
|This is a ground unidirectional finish obtained with 150/180/240/320 grit abrasive, which is characterized by parallel brushing lines, it is also known as Satin.|
|Scotch Brite||It's a semi-dull finish with uniform grain, which is obtained using finer abrasives than No.4/NO.5/NO.6. This finish has smooth, soft and exquisite grains which has a low level of reflectivity and unidirectional texture.|
|Hairline||Seemingly endless polishing lines extend uniformly along with the length of the coil give the hairline. It's a well-defined directional finish with long-grain and fine-line.|
Contact Person: Sara