-
Aluminum Sheet Metal
-
Aluminum Ingot
-
Copper Strip Coil
-
Copper Pipe Tube
-
Copper Round Bar
-
Aluminum Copper Scrap
-
Stainless Steel Plate
-
304 Stainless Steel Sheet
-
316 Stainless Steel Sheet
-
Stainless Steel Welded Tube
-
Seamless Stainless Steel Pipe
-
Stainless Steel Sheet Coil
-
Stainless Steel Strip Coil
-
Stainless Steel Wire Coil
-
Duplex Stainless Steel
-
Stainless Steel Profiles
-
Stainless Steel Pipe Fittings
-
Stainless Steel Surface Finish
-
Nickel Based Alloy
-
Sam-USAVey good BA and HL Finish ,and the same time good package to protect the goods
-
Fathiha-UAEFast delivery time,good quality From WUXI XINFUTIAN METAL PRODUCTS CO.,LTD ,hope to have a win-win business in the future .
-
Abbas-PakistanWe Have Cooperation With this Factory Many Years , Everything Goes Very Well.l Like This Factory !
201 Grade Stainless Steel Surface Finish , Ss Finish Etching Design For Elevator
Pattern | As Customized | Color | Sliver Finish |
---|---|---|---|
Technology | Etching | Material | Stainless Steel |
Protect | Film Protection | Width | 1219mm Or As Customized |
Length | 2438mm Or As Customized | ||
High Light | stainless steel sheet surface finish,stainless steel kick plate |
201 Grade Stainless Steel Surface Finish , Ss Finish Etching Design For Elevator
1.What is etching?
Etching is traditionally the process of using strong acid or mordant to cut into the unprotected parts of a metal surface to create a design in intaglio (incised) in the metal. In modern manufacturing, other chemicals may be used on other types of material. As a method of printmaking, it is, along with engraving, the most important technique for old master prints, and remains in wide use today. In a number of modern variants such as microfabrication etching and photochemical milling it is a crucial technique in much modern technology, including circuit boards.
The plate is then put through a high-pressure printing press together with a sheet of paper (often moistened to soften it). The paper picks up the ink from the etched lines, making a print. The process can be repeated many times; typically several hundred impressions (copies) could be printed before the plate shows much sign of wear. The work on the plate can also be added to by repeating the whole process; this creates an etching which exists in more than one state.
2. Chemical Properties:
201 | C | Si | Mn | P | S | Ni | Cr |
≤0.15 | ≤1.00 | 5.5~7.50 | ≤0.050 | ≤0.03 | 3.50~5.50 | 16.00~18.00 |
Mechanical Properties:
201 | Tensile Strength: | 520MPa |
Yield strength : | 275MPa | |
Elongation: | 55 to 60% | |
Elastic Modulus: | 203000MPa | |
Hardness | HRB<183N/mm2(MPa) | |
Density : | 7.93g/cm3 |
3. Application
Decoration Industry,Chemical Industry .
