Hairline Finish 304 Stainless Steel Sheet Thickness 0.28MM Corrosion Resistance

      Hairline Finish 304 Stainless Steel Sheet Thickness 0.28MM Corrosion Resistance        

300 Series stainless steels are classified as austenitic, and are hardenable only by cold working methods. These grades of stainless have chromium (approx. 18 to 30%) and nickel (approx. 6 to 20%) as their major alloying additions. Type 304 is the most widely used alloy of all stainless steels. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain.

304 standards CHINA:06Cr19Ni10 ASTM/ASME: S30400 DIN: 1.4301

1. Products Details 

2. Chemical Properties:

Pysical properties:

Tensile strength σb (MPa): ≥ 520

Conditions yield strength : σ0.2 (MPa) ≥ 205

Elongation δ5 (%) ≥40

Section shrinkage ψ (%) ≥ 60

Hardness: ≤ 187HB; ≤ 90HRB; ≤ 200HV

Melting point (℃) : 1398 ~ 1454

Specific heat capacity (0 ~ 100 ℃, KJ kgK) : 0.50

Thermal conductivity (W m. K): (100 ℃), 16.3 21.5 (500 ℃)

The linear expansion coefficient k. (10) : (0 ~ 100 ℃), 17.2 (0 ~ 500 ℃) of 18.4

Resistivity (20 ℃, 10 Ω m.): 0.73

The longitudinal elastic modulus (20 ℃, KN/mm) : 193

4. Package

Standard export package with Kraft  paper with wooded trays or as required,containers sizes as follows 

5. Applications:

Pattern plate appearance beautiful, can slip, enhance performance, save steel and many other advantages. In the transportation, construction, decoration, equipment around the floor, machinery, shipbuilding and other fields are widely used. In general, the use of the side of the pattern of mechanical properties, mechanical performance is not high, so the quality of the main pattern of pattern flower pattern, pattern height, pattern height difference. Currently on the market commonly used thickness ranging from 2.0-8mm, the width of the common 1250,1500 mm.